Mining high-confidence candidate genes with cageminer
30 April 2024
Contents
1 Introduction
Over the past years, RNA-seq data for several species have accumulated in public repositories. Additionally, genome-wide association studies (GWAS) have
identified SNPs associated with phenotypes of interest, such as agronomic
traits in plants, production traits in livestock, and complex human diseases.
However, although GWAS can identify SNPs, they cannot identify causative genes
associated with the studied phenotype. The goal of cageminer is to integrate
GWAS-derived SNPs with transcriptomic data to mine candidate genes and identify
high-confidence genes associated with traits of interest.
2 Citation
If you use cageminer in your research, please cite us. You can obtain
citation information with citation('cageminer'), as demonstrated below:
print(citation('cageminer'), bibtex = TRUE)
#> To cite cageminer in publications use:
#>
#> Almeida-Silva, F., & Venancio, T. M. (2022). cageminer: an
#> R/Bioconductor package to prioritize candidate genes by integrating
#> genome-wide association studies and gene coexpression networks. in
#> silico Plants, 4(2), diac018.
#> https://doi.org/10.1093/insilicoplants/diac018
#>
#> A BibTeX entry for LaTeX users is
#>
#> @Article{,
#> title = {cageminer: an R/Bioconductor package to prioritize candidate genes by integrating genome-wide association studies and gene coexpression networks},
#> author = {Fabricio Almeida-Silva and Thiago M. Venancio},
#> journal = {in silico Plants},
#> year = {2022},
#> volume = {4},
#> number = {2},
#> pages = {diac018},
#> url = {https://doi.org/10.1093/insilicoplants/diac018},
#> doi = {10.1093/insilicoplants/diac018},
#> }3 Installation
if(!requireNamespace('BiocManager', quietly = TRUE))
install.packages('BiocManager')
BiocManager::install("cageminer")# Load package after installation
library(cageminer)
set.seed(123) # for reproducibility4 Data description
For this vignette, we will use transcriptomic data on pepper (Capsicum annuum) response to Phytophthora root rot (Kim et al. 2018), and GWAS SNPs associated with resistance to Phytophthora root rot from Siddique et al. (2019). To ensure interoperability with other Bioconductor packages, expression data are stored as SummarizedExperiment objects, and gene/SNP positions are stored as GRanges objects.
# GRanges of SNP positions
data(snp_pos)
snp_pos
#> GRanges object with 116 ranges and 0 metadata columns:
#> seqnames ranges strand
#> <Rle> <IRanges> <Rle>
#> 2 Chr02 149068682 *
#> 3 Chr03 5274098 *
#> 4 Chr05 27703815 *
#> 5 Chr05 27761792 *
#> 6 Chr05 27807397 *
#> ... ... ... ...
#> 114 Chr12 230514706 *
#> 115 Chr12 230579178 *
#> 116 Chr12 230812962 *
#> 117 Chr12 230887290 *
#> 118 Chr12 231022812 *
#> -------
#> seqinfo: 8 sequences from an unspecified genome; no seqlengths
# GRanges of chromosome lengths
data(chr_length)
chr_length
#> GRanges object with 12 ranges and 0 metadata columns:
#> seqnames ranges strand
#> <Rle> <IRanges> <Rle>
#> [1] Chr01 1-272704604 *
#> [2] Chr02 1-171128871 *
#> [3] Chr03 1-257900543 *
#> [4] Chr04 1-222584275 *
#> [5] Chr05 1-233468049 *
#> ... ... ... ...
#> [8] Chr08 1-145103255 *
#> [9] Chr09 1-252779264 *
#> [10] Chr10 1-233593809 *
#> [11] Chr11 1-259726002 *
#> [12] Chr12 1-235688241 *
#> -------
#> seqinfo: 12 sequences from an unspecified genome; no seqlengths
# GRanges of gene coordinates
data(gene_ranges)
gene_ranges
#> GRanges object with 30242 ranges and 6 metadata columns:
#> seqnames ranges strand | source type score
#> <Rle> <IRanges> <Rle> | <factor> <factor> <numeric>
#> [1] Chr01 63209-63880 - | PGA1.55 gene NA
#> [2] Chr01 112298-112938 - | PGA1.55 gene NA
#> [3] Chr01 117979-118392 + | PGA1.55 gene NA
#> [4] Chr01 119464-119712 + | PGA1.55 gene NA
#> [5] Chr01 119892-120101 + | PGA1.55 gene NA
#> ... ... ... ... . ... ... ...
#> [30238] Chr12 235631138-235631467 - | PGA1.55 gene NA
#> [30239] Chr12 235642644-235645110 + | PGA1.55 gene NA
#> [30240] Chr12 235645483-235651927 - | PGA1.55 gene NA
#> [30241] Chr12 235652709-235655955 - | PGA1.55 gene NA
#> [30242] Chr12 235663655-235665276 - | PGA1.55 gene NA
#> phase ID Parent
#> <integer> <character> <CharacterList>
#> [1] <NA> CA01g00010
#> [2] <NA> CA01g00020
#> [3] <NA> CA01g00030
#> [4] <NA> CA01g00040
#> [5] <NA> CA01g00050
#> ... ... ... ...
#> [30238] <NA> CA12g22890
#> [30239] <NA> CA12g22900
#> [30240] <NA> CA12g22910
#> [30241] <NA> CA12g22920
#> [30242] <NA> CA12g22930
#> -------
#> seqinfo: 12 sequences from an unspecified genome; no seqlengths
# SummarizedExperiment of pepper response to Phytophthora root rot (RNA-seq)
data(pepper_se)
pepper_se
#> class: SummarizedExperiment
#> dim: 3892 45
#> metadata(0):
#> assays(1): ''
#> rownames(3892): CA02g23440 CA02g05510 ... CA03g35110 CA02g12750
#> rowData names(0):
#> colnames(45): PL1 PL2 ... TMV-P0-3D TMV-P0-Up
#> colData names(1): Condition5 Visualizing SNP distribution
Before mining high-confidence candidates, you can visualize the SNP distribution
in the genome to explore possible patterns. First, let’s see if SNPs are
uniformly across chromosomes with plot_snp_distribution().
plot_snp_distribution(snp_pos)
As we can see, SNPs associated with resistance to Phytophthora root rot tend to
co-occur in chromosome 5. Now, we can see if they are close to each other in the
genome, and if they are located in gene-rich regions. We can visualize it with
plot_snp_circos, which displays a circos plot of SNPs across chromosomes.
plot_snp_circos(chr_length, gene_ranges, snp_pos)
There seems to be no clustering in gene-rich regions, but we can see that SNPs in the same chromosome tend to be physically close to each other.
If you have SNP positions for multiple traits, you need to store them in GRangesList or CompressedGRangesList objects, so each element will have SNP positions for a particular trait. Then, you can visualize their distribution as you would do for a single trait. Let’s simulate multiple traits to see how it works:
# Simulate multiple traits by sampling 20 SNPs 4 times
snp_list <- GenomicRanges::GRangesList(
Trait1 = sample(snp_pos, 20),
Trait2 = sample(snp_pos, 20),
Trait3 = sample(snp_pos, 20),
Trait4 = sample(snp_pos, 20)
)
# Visualize SNP distribution across chromosomes
plot_snp_distribution(snp_list)
# Visualize SNP positions in the genome as a circos plot
plot_snp_circos(chr_length, gene_ranges, snp_list)
6 Algorithm description
The cageminer algorithm identifies high-confidence candidate genes with
3 steps, which can be interpreted as 3 sources of evidence:
- Select all genes in a sliding window relative to each SNP as putative candidates.
- Find candidates from step 1 in coexpression modules enriched in guide genes (genes that are known to be associated with the trait of interest).
- Find candidates from step 2 that are correlated with a condition of interest.
These 3 steps can be executed individually (if users want more control on what happens after each step) or all at once.
7 Step-by-step candidate gene mining
To run the candidate mining step by step, you will need the functions
mine_step1(), mine_step2, and mine_step3.
7.1 Step 1: finding genes close to (or in linkage disequilibrium with) SNPs
The function mine_step1() identifies genes based on step 1 and returns a
GRanges object with all putative candidates and their location in the genome.
For that, you need to give 2 GRanges objects as input, one with the
gene coordinates1 Tip: to create GRanges objects from genomic coordinates in GFF/GTF
files, you can use the import() function from the Bioconductor package
rtracklayer (Lawrence, Gentleman, and Carey 2009). and another with the SNP positions.
candidates1 <- mine_step1(gene_ranges, snp_pos)
candidates1
#> GRanges object with 1265 ranges and 6 metadata columns:
#> seqnames ranges strand | source type score
#> <Rle> <IRanges> <Rle> | <factor> <factor> <numeric>
#> [1] Chr02 147076830-147083477 + | PGA1.55 gene NA
#> [2] Chr02 147084450-147086637 - | PGA1.55 gene NA
#> [3] Chr02 147099482-147104002 - | PGA1.55 gene NA
#> [4] Chr02 147126373-147126537 + | PGA1.55 gene NA
#> [5] Chr02 147129897-147132335 - | PGA1.55 gene NA
#> ... ... ... ... . ... ... ...
#> [1261] Chr12 232989761-232990947 - | PGA1.55 gene NA
#> [1262] Chr12 232994658-232999784 + | PGA1.55 gene NA
#> [1263] Chr12 233001307-233004705 + | PGA1.55 gene NA
#> [1264] Chr12 233005539-233011740 - | PGA1.55 gene NA
#> [1265] Chr12 233018159-233022142 - | PGA1.55 gene NA
#> phase ID Parent
#> <integer> <character> <CharacterList>
#> [1] <NA> CA02g16550
#> [2] <NA> CA02g16560
#> [3] <NA> CA02g16570
#> [4] <NA> CA02g16580
#> [5] <NA> CA02g16590
#> ... ... ... ...
#> [1261] <NA> CA12g21190
#> [1262] <NA> CA12g21200
#> [1263] <NA> CA12g21210
#> [1264] <NA> CA12g21220
#> [1265] <NA> CA12g21230
#> -------
#> seqinfo: 12 sequences from an unspecified genome; no seqlengths
length(candidates1)
#> [1] 1265The first step identified 1265 putative candidate genes.
By default, cageminer uses a sliding window of 2 Mb to select putative
candidates2 Note: By default, SNPs coordinates will be expanded upstream and
downstream according to the input window size. However, you may have
previously determined genomic intervals for each SNP (e.g., calculated based on
linkage disequilibrium) for which you want to extract genes. To avoid expanding
a sliding window in such cases, set expand_intervals = FALSE. This will
ensure that only SNPs are expanded, but not intervals (width >1).. If you want to visually inspect a simulation of different
sliding windows to choose a different one, you can use simulate_windows().
# Single trait
simulate_windows(gene_ranges, snp_pos)
# Multiple traits
simulate_windows(gene_ranges, snp_list)
7.2 Step 2: finding coexpression modules enriched in guide genes
The function mine_step2() selects candidates in coexpression modules enriched
in guide genes. For that, users must infer the GCN with the function exp2gcn()
from the package BioNERO (Almeida-Silva and Venancio 2021). Guide genes can be either a character
vector of guide gene IDs or a data frame with gene IDs in the first column
and annotation in the second column (useful if guides are divided in functional
categories, for instance). Here, pepper genes associated with defense-related
MapMan bins were retrieved from PLAZA 3.0 Dicots (Proost et al. 2015) and used as
guides.
The resulting object is a list of two elements:
- candidates: character vector of mined candidate gene IDs.
- enrichment: data frame of enrichment results.
# Load guide genes
data(guides)
head(guides)
#> Gene Description
#> 1 CA10g07770 response to stimulus
#> 2 CA10g07770 response to stress
#> 3 CA10g07770 cellular response to stimulus
#> 4 CA10g07770 cellular response to stress
#> 6 CA10g07770 regulation of cellular response to stress
#> 8 CA10g07770 regulation of response to stimulus
# Infer GCN
sft <- BioNERO::SFT_fit(pepper_se, net_type = "signed", cor_method = "pearson")
#> Warning: executing %dopar% sequentially: no parallel backend registered
#> Power SFT.R.sq slope truncated.R.sq mean.k. median.k. max.k.
#> 1 3 0.000902 0.0985 0.806 718.0 701.00 1060.0
#> 2 4 0.039500 -0.4680 0.833 470.0 451.00 807.0
#> 3 5 0.110000 -0.6540 0.851 322.0 301.00 639.0
#> 4 6 0.269000 -0.9120 0.891 229.0 209.00 520.0
#> 5 7 0.449000 -1.1200 0.920 168.0 149.00 432.0
#> 6 8 0.598000 -1.2900 0.945 126.0 109.00 364.0
#> 7 9 0.685000 -1.4300 0.949 96.8 81.00 311.0
#> 8 10 0.744000 -1.5000 0.961 75.7 61.30 268.0
#> 9 11 0.786000 -1.5800 0.964 60.2 47.00 233.0
#> 10 12 0.817000 -1.6100 0.969 48.5 36.50 204.0
#> 11 13 0.824000 -1.6600 0.966 39.5 28.80 180.0
#> 12 14 0.831000 -1.6900 0.965 32.5 23.00 159.0
#> 13 15 0.846000 -1.7000 0.972 27.1 18.30 142.0
#> 14 16 0.859000 -1.7100 0.976 22.7 14.70 127.0
#> 15 17 0.869000 -1.7200 0.981 19.2 11.90 115.0
#> 16 18 0.877000 -1.7200 0.984 16.3 9.76 103.0
#> 17 19 0.882000 -1.7200 0.986 14.0 7.97 93.7
#> 18 20 0.889000 -1.7100 0.988 12.0 6.63 85.2
gcn <- BioNERO::exp2gcn(pepper_se, net_type = "signed", cor_method = "pearson",
module_merging_threshold = 0.8, SFTpower = sft$power)
#> ..connectivity..
#> ..matrix multiplication (system BLAS)..
#> ..normalization..
#> ..done.
# Apply step 2
candidates2 <- mine_step2(pepper_se, gcn = gcn, guides = guides$Gene,
candidates = candidates1$ID)
#> Enrichment analysis for module black...
#> Enrichment analysis for module brown...
#> Enrichment analysis for module darkgreen...
#> Enrichment analysis for module darkgrey...
#> Enrichment analysis for module darkmagenta...
#> Enrichment analysis for module darkolivegreen...
#> Enrichment analysis for module darkorange...
#> Enrichment analysis for module darkorange2...
#> Enrichment analysis for module darkred...
#> Enrichment analysis for module darkturquoise...
#> Enrichment analysis for module green...
#> Enrichment analysis for module grey60...
#> Enrichment analysis for module ivory...
#> Enrichment analysis for module lightcyan...
#> Enrichment analysis for module midnightblue...
#> Enrichment analysis for module orangered4...
#> Enrichment analysis for module paleturquoise...
#> Enrichment analysis for module pink...
#> Enrichment analysis for module red...
#> Enrichment analysis for module royalblue...
#> Enrichment analysis for module salmon...
#> Enrichment analysis for module steelblue...
#> Enrichment analysis for module violet...
candidates2$candidates
#> [1] "CA10g08490" "CA03g01790" "CA10g12640" "CA12g21230" "CA10g02810"
#> [6] "CA03g01800" "CA02g17460" "CA10g02800" "CA03g03320" "CA05g14230"
#> [11] "CA07g04010" "CA05g06480" "CA03g02720" "CA10g02630" "CA12g18010"
#> [16] "CA07g04000" "CA02g16570" "CA10g02570" "CA05g15120" "CA02g16830"
#> [21] "CA12g18440" "CA12g18400" "CA10g02780" "CA07g12720" "CA03g01900"
#> [26] "CA12g07460" "CA03g02360" "CA02g16620" "CA10g08420" "CA03g02960"
#> [31] "CA03g03010" "CA05g15110" "CA02g16550" "CA05g14730" "CA02g16900"
#> [36] "CA03g03310" "CA02g17030"
candidates2$enrichment
#> term genes all pval padj category module
#> 1 guide 323 1303 2.575418e-05 5.150837e-05 Class blackAfter the step 2, we got 37 candidates.
7.3 Step 3: finding genes with altered expression in a condition of interest
The function mine_step3() identifies candidate genes whose expression levels
significantly increase or decrease in a particular condition. For that, you
need to specify what level from the sample metadata corresponds to this
condition. The resulting object from mine_step3() is a data frame with mined
candidates and their correlation to the condition of interest.
# See the levels from the sample metadata
unique(pepper_se$Condition)
#> [1] "Placenta" "Pericarp" "PRR_control" "PRR_stress"
#> [5] "virus_control" "PepMov_stress" "TMV"
# Apply step 3 using "PRR_stress" as the condition of interest
candidates3 <- mine_step3(pepper_se, candidates = candidates2$candidates,
sample_group = "PRR_stress")
candidates3
#> gene trait cor pvalue group
#> 159 CA07g04010 PRR_stress 0.6441044 1.806861e-06 Condition
#> 152 CA07g04000 PRR_stress 0.6304891 3.453184e-06 Condition
#> 54 CA03g01790 PRR_stress 0.6270820 4.041221e-06 Condition
#> 194 CA10g02800 PRR_stress 0.5944358 1.666104e-05 Condition
#> 26 CA02g16830 PRR_stress 0.5896431 2.025006e-05 Condition
#> 257 CA12g21230 PRR_stress 0.5820251 2.743821e-05 Condition
#> 82 CA03g02720 PRR_stress 0.5817119 2.777850e-05 Condition
#> 131 CA05g14730 PRR_stress 0.5660078 5.072546e-05 Condition
#> 33 CA02g16900 PRR_stress 0.5633723 5.595313e-05 Condition
#> 236 CA12g18010 PRR_stress 0.5532646 8.088901e-05 Condition
#> 103 CA03g03310 PRR_stress 0.5520272 8.455364e-05 Condition
#> 19 CA02g16620 PRR_stress 0.5426992 1.174310e-04 Condition
#> 47 CA02g17460 PRR_stress 0.5415951 1.220086e-04 Condition
#> 201 CA10g02810 PRR_stress 0.5368391 1.436389e-04 Condition
#> 173 CA10g02570 PRR_stress 0.5363652 1.459748e-04 Condition
#> 61 CA03g01800 PRR_stress 0.5317864 1.703832e-04 Condition
#> 187 CA10g02780 PRR_stress 0.5255675 2.094609e-04 Condition
#> 250 CA12g18440 PRR_stress 0.5135431 3.087865e-04 Condition
#> 5 CA02g16550 PRR_stress 0.5099801 3.454712e-04 Condition
#> 75 CA03g02360 PRR_stress 0.4245213 3.655030e-03 Condition
#> 89 CA03g02960 PRR_stress 0.4132336 4.782097e-03 Condition
#> 208 CA10g08420 PRR_stress 0.4123162 4.885782e-03 Condition
#> 96 CA03g03010 PRR_stress 0.4074773 5.465748e-03 Condition
#> 215 CA10g08490 PRR_stress 0.3866456 8.700127e-03 Condition
#> 166 CA07g12720 PRR_stress 0.3829689 9.416098e-03 Condition
#> 145 CA05g15120 PRR_stress 0.3701199 1.233022e-02 Condition
#> 222 CA10g12640 PRR_stress 0.3264978 2.859993e-02 Condition
#> 12 CA02g16570 PRR_stress 0.3207866 3.167524e-02 Condition
#> 229 CA12g07460 PRR_stress 0.3076388 3.980351e-02 Condition
#> 110 CA03g03320 PRR_stress 0.3045042 4.197434e-02 ConditionFinally, we got 30 high-confidence candidate genes associated with resistance to Phytophthora root rot. Genes with negative correlation coefficients to the condition can be interpreted as having significantly reduced expression in this condition, while genes with positive correlation coefficients have significantly increased expression in this condition.
8 Automatic candidate gene mining
Alternatively, if you are not interested in inspecting the results after each
step, you can get to the same results from the previous section with a single
step by using the function mine_candidates(). This function is a wrapper that
calls mine_step1(), sends the results to mine_step2(), and then it sends
the results from mine_step2() to mine_step3().
candidates <- mine_candidates(gene_ranges = gene_ranges,
marker_ranges = snp_pos,
exp = pepper_se,
gcn = gcn, guides = guides$Gene,
sample_group = "PRR_stress")
#> Enrichment analysis for module black...
#> Enrichment analysis for module brown...
#> Enrichment analysis for module darkgreen...
#> Enrichment analysis for module darkgrey...
#> Enrichment analysis for module darkmagenta...
#> Enrichment analysis for module darkolivegreen...
#> Enrichment analysis for module darkorange...
#> Enrichment analysis for module darkorange2...
#> Enrichment analysis for module darkred...
#> Enrichment analysis for module darkturquoise...
#> Enrichment analysis for module green...
#> Enrichment analysis for module grey60...
#> Enrichment analysis for module ivory...
#> Enrichment analysis for module lightcyan...
#> Enrichment analysis for module midnightblue...
#> Enrichment analysis for module orangered4...
#> Enrichment analysis for module paleturquoise...
#> Enrichment analysis for module pink...
#> Enrichment analysis for module red...
#> Enrichment analysis for module royalblue...
#> Enrichment analysis for module salmon...
#> Enrichment analysis for module steelblue...
#> Enrichment analysis for module violet...
candidates
#> gene trait cor pvalue group
#> 159 CA07g04010 PRR_stress 0.6441044 1.806861e-06 Condition
#> 152 CA07g04000 PRR_stress 0.6304891 3.453184e-06 Condition
#> 54 CA03g01790 PRR_stress 0.6270820 4.041221e-06 Condition
#> 194 CA10g02800 PRR_stress 0.5944358 1.666104e-05 Condition
#> 26 CA02g16830 PRR_stress 0.5896431 2.025006e-05 Condition
#> 257 CA12g21230 PRR_stress 0.5820251 2.743821e-05 Condition
#> 82 CA03g02720 PRR_stress 0.5817119 2.777850e-05 Condition
#> 131 CA05g14730 PRR_stress 0.5660078 5.072546e-05 Condition
#> 33 CA02g16900 PRR_stress 0.5633723 5.595313e-05 Condition
#> 236 CA12g18010 PRR_stress 0.5532646 8.088901e-05 Condition
#> 103 CA03g03310 PRR_stress 0.5520272 8.455364e-05 Condition
#> 19 CA02g16620 PRR_stress 0.5426992 1.174310e-04 Condition
#> 47 CA02g17460 PRR_stress 0.5415951 1.220086e-04 Condition
#> 201 CA10g02810 PRR_stress 0.5368391 1.436389e-04 Condition
#> 173 CA10g02570 PRR_stress 0.5363652 1.459748e-04 Condition
#> 61 CA03g01800 PRR_stress 0.5317864 1.703832e-04 Condition
#> 187 CA10g02780 PRR_stress 0.5255675 2.094609e-04 Condition
#> 250 CA12g18440 PRR_stress 0.5135431 3.087865e-04 Condition
#> 5 CA02g16550 PRR_stress 0.5099801 3.454712e-04 Condition
#> 75 CA03g02360 PRR_stress 0.4245213 3.655030e-03 Condition
#> 89 CA03g02960 PRR_stress 0.4132336 4.782097e-03 Condition
#> 208 CA10g08420 PRR_stress 0.4123162 4.885782e-03 Condition
#> 96 CA03g03010 PRR_stress 0.4074773 5.465748e-03 Condition
#> 215 CA10g08490 PRR_stress 0.3866456 8.700127e-03 Condition
#> 166 CA07g12720 PRR_stress 0.3829689 9.416098e-03 Condition
#> 145 CA05g15120 PRR_stress 0.3701199 1.233022e-02 Condition
#> 222 CA10g12640 PRR_stress 0.3264978 2.859993e-02 Condition
#> 12 CA02g16570 PRR_stress 0.3207866 3.167524e-02 Condition
#> 229 CA12g07460 PRR_stress 0.3076388 3.980351e-02 Condition
#> 110 CA03g03320 PRR_stress 0.3045042 4.197434e-02 Condition9 Score candidates
In some cases, you might have more high-confidence candidates than you expected,
and you want to pick only the top n genes for validation, for instance. In
this scenario, you need to assign scores to your mined candidates to pick the
top n genes with the highest scores. The function score_genes() does
that by using the formula below:
\[S_i = r_{pb} \kappa\]
where:
\(\kappa\) = 2 if the gene encodes a transcription factor
\(\kappa\) = 2 if the gene is a hub
\(\kappa\) = 3 if the gene encodes a hub transcription factor
\(\kappa\) = 1 if none of the conditions above are true
By default, score_genes picks the top 10 candidates. If there are less than 10 candidates, it will return all candidates sorted by scores. Here, TFs were obtained from PlantTFDB 4.0 (Jin et al. 2017). Hub genes can be
identified with the function get_hubs_gcn() from the package BioNERO.
# Load TFs
data(tfs)
head(tfs)
#> Gene_ID Family
#> 1 CA12g20650 RAV
#> 2 CA00g00130 WRKY
#> 3 CA00g00230 WRKY
#> 4 CA00g00390 LBD
#> 5 CA00g03050 NAC
#> 6 CA00g07140 E2F/DP
# Get GCN hubs
hubs <- BioNERO::get_hubs_gcn(pepper_se, gcn)
head(hubs)
#> Gene Module kWithin
#> 1 CA12g18900 black 161.1001
#> 2 CA07g15040 black 159.9350
#> 3 CA07g15050 black 157.9800
#> 4 CA05g00150 black 153.9266
#> 5 CA03g08130 black 152.7083
#> 6 CA10g03980 black 148.5663
# Score candidates
scored <- score_genes(candidates, hubs$Gene, tfs$Gene_ID)
scored
#> gene trait cor pvalue group score
#> 194 CA10g02800 PRR_stress 0.5944358 1.666104e-05 Condition 1.1888715
#> 26 CA02g16830 PRR_stress 0.5896431 2.025006e-05 Condition 1.1792862
#> 47 CA02g17460 PRR_stress 0.5415951 1.220086e-04 Condition 1.0831901
#> 61 CA03g01800 PRR_stress 0.5317864 1.703832e-04 Condition 1.0635728
#> 75 CA03g02360 PRR_stress 0.4245213 3.655030e-03 Condition 0.8490427
#> 159 CA07g04010 PRR_stress 0.6441044 1.806861e-06 Condition 0.6441044
#> 152 CA07g04000 PRR_stress 0.6304891 3.453184e-06 Condition 0.6304891
#> 54 CA03g01790 PRR_stress 0.6270820 4.041221e-06 Condition 0.6270820
#> 257 CA12g21230 PRR_stress 0.5820251 2.743821e-05 Condition 0.5820251
#> 82 CA03g02720 PRR_stress 0.5817119 2.777850e-05 Condition 0.5817119As none of the mined candidates are hubs or encode transcription factors, their scores are simply their correlation coefficients with the condition of interest.
Session information
This document was created under the following conditions:
sessioninfo::session_info()
#> ─ Session info ───────────────────────────────────────────────────────────────
#> setting value
#> version R version 4.4.0 beta (2024-04-15 r86425)
#> os Ubuntu 22.04.4 LTS
#> system x86_64, linux-gnu
#> ui X11
#> language (EN)
#> collate en_US.UTF-8
#> ctype en_US.UTF-8
#> tz America/New_York
#> date 2024-04-30
#> pandoc 2.7.3 @ /usr/bin/ (via rmarkdown)
#>
#> ─ Packages ───────────────────────────────────────────────────────────────────
#> package * version date (UTC) lib source
#> abind 1.4-5 2016-07-21 [2] CRAN (R 4.4.0)
#> annotate 1.82.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> AnnotationDbi 1.66.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> AnnotationFilter 1.28.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> backports 1.4.1 2021-12-13 [2] CRAN (R 4.4.0)
#> base64enc 0.1-3 2015-07-28 [2] CRAN (R 4.4.0)
#> Biobase 2.64.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> BiocFileCache 2.12.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> BiocGenerics 0.50.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> BiocIO 1.14.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> BiocManager 1.30.22 2023-08-08 [2] CRAN (R 4.4.0)
#> BiocParallel 1.38.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> BiocStyle * 2.32.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> biomaRt 2.60.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> BioNERO 1.12.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> Biostrings 2.72.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> biovizBase 1.52.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> bit 4.0.5 2022-11-15 [2] CRAN (R 4.4.0)
#> bit64 4.0.5 2020-08-30 [2] CRAN (R 4.4.0)
#> bitops 1.0-7 2021-04-24 [2] CRAN (R 4.4.0)
#> blob 1.2.4 2023-03-17 [2] CRAN (R 4.4.0)
#> bookdown 0.39 2024-04-15 [2] CRAN (R 4.4.0)
#> BSgenome 1.72.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> bslib 0.7.0 2024-03-29 [2] CRAN (R 4.4.0)
#> cachem 1.0.8 2023-05-01 [2] CRAN (R 4.4.0)
#> cageminer * 1.10.0 2024-04-30 [1] Bioconductor 3.19 (R 4.4.0)
#> checkmate 2.3.1 2023-12-04 [2] CRAN (R 4.4.0)
#> circlize 0.4.16 2024-02-20 [2] CRAN (R 4.4.0)
#> cli 3.6.2 2023-12-11 [2] CRAN (R 4.4.0)
#> clue 0.3-65 2023-09-23 [2] CRAN (R 4.4.0)
#> cluster 2.1.6 2023-12-01 [3] CRAN (R 4.4.0)
#> coda 0.19-4.1 2024-01-31 [2] CRAN (R 4.4.0)
#> codetools 0.2-20 2024-03-31 [3] CRAN (R 4.4.0)
#> colorspace 2.1-0 2023-01-23 [2] CRAN (R 4.4.0)
#> commonmark 1.9.1 2024-01-30 [2] CRAN (R 4.4.0)
#> ComplexHeatmap 2.20.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> crayon 1.5.2 2022-09-29 [2] CRAN (R 4.4.0)
#> curl 5.2.1 2024-03-01 [2] CRAN (R 4.4.0)
#> data.table 1.15.4 2024-03-30 [2] CRAN (R 4.4.0)
#> DBI 1.2.2 2024-02-16 [2] CRAN (R 4.4.0)
#> dbplyr 2.5.0 2024-03-19 [2] CRAN (R 4.4.0)
#> DelayedArray 0.30.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> dichromat 2.0-0.1 2022-05-02 [2] CRAN (R 4.4.0)
#> digest 0.6.35 2024-03-11 [2] CRAN (R 4.4.0)
#> doParallel 1.0.17 2022-02-07 [2] CRAN (R 4.4.0)
#> dplyr 1.1.4 2023-11-17 [2] CRAN (R 4.4.0)
#> dynamicTreeCut 1.63-1 2016-03-11 [2] CRAN (R 4.4.0)
#> edgeR 4.2.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> ensembldb 2.28.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> evaluate 0.23 2023-11-01 [2] CRAN (R 4.4.0)
#> fansi 1.0.6 2023-12-08 [2] CRAN (R 4.4.0)
#> farver 2.1.1 2022-07-06 [2] CRAN (R 4.4.0)
#> fastcluster 1.2.6 2024-01-12 [2] CRAN (R 4.4.0)
#> fastmap 1.1.1 2023-02-24 [2] CRAN (R 4.4.0)
#> filelock 1.0.3 2023-12-11 [2] CRAN (R 4.4.0)
#> foreach 1.5.2 2022-02-02 [2] CRAN (R 4.4.0)
#> foreign 0.8-86 2023-11-28 [3] CRAN (R 4.4.0)
#> Formula 1.2-5 2023-02-24 [2] CRAN (R 4.4.0)
#> genefilter 1.86.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> generics 0.1.3 2022-07-05 [2] CRAN (R 4.4.0)
#> GENIE3 1.26.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> GenomeInfoDb 1.40.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> GenomeInfoDbData 1.2.12 2024-04-16 [2] Bioconductor
#> GenomicAlignments 1.40.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> GenomicFeatures 1.56.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> GenomicRanges 1.56.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> GetoptLong 1.0.5 2020-12-15 [2] CRAN (R 4.4.0)
#> GGally 2.2.1 2024-02-14 [2] CRAN (R 4.4.0)
#> ggbio 1.52.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> ggdendro 0.2.0 2024-02-23 [2] CRAN (R 4.4.0)
#> ggnetwork 0.5.13 2024-02-14 [2] CRAN (R 4.4.0)
#> ggplot2 3.5.1 2024-04-23 [2] CRAN (R 4.4.0)
#> ggrepel 0.9.5 2024-01-10 [2] CRAN (R 4.4.0)
#> ggstats 0.6.0 2024-04-05 [2] CRAN (R 4.4.0)
#> ggtext 0.1.2 2022-09-16 [2] CRAN (R 4.4.0)
#> GlobalOptions 0.1.2 2020-06-10 [2] CRAN (R 4.4.0)
#> glue 1.7.0 2024-01-09 [2] CRAN (R 4.4.0)
#> GO.db 3.19.1 2024-04-23 [2] Bioconductor
#> graph 1.82.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> gridExtra 2.3 2017-09-09 [2] CRAN (R 4.4.0)
#> gridtext 0.1.5 2022-09-16 [2] CRAN (R 4.4.0)
#> gtable 0.3.5 2024-04-22 [2] CRAN (R 4.4.0)
#> highr 0.10 2022-12-22 [2] CRAN (R 4.4.0)
#> Hmisc 5.1-2 2024-03-11 [2] CRAN (R 4.4.0)
#> hms 1.1.3 2023-03-21 [2] CRAN (R 4.4.0)
#> htmlTable 2.4.2 2023-10-29 [2] CRAN (R 4.4.0)
#> htmltools 0.5.8.1 2024-04-04 [2] CRAN (R 4.4.0)
#> htmlwidgets 1.6.4 2023-12-06 [2] CRAN (R 4.4.0)
#> httr 1.4.7 2023-08-15 [2] CRAN (R 4.4.0)
#> httr2 1.0.1 2024-04-01 [2] CRAN (R 4.4.0)
#> igraph 2.0.3 2024-03-13 [2] CRAN (R 4.4.0)
#> impute 1.78.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> intergraph 2.0-4 2024-02-01 [2] CRAN (R 4.4.0)
#> IRanges 2.38.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> iterators 1.0.14 2022-02-05 [2] CRAN (R 4.4.0)
#> jquerylib 0.1.4 2021-04-26 [2] CRAN (R 4.4.0)
#> jsonlite 1.8.8 2023-12-04 [2] CRAN (R 4.4.0)
#> KEGGREST 1.44.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> knitr 1.46 2024-04-06 [2] CRAN (R 4.4.0)
#> labeling 0.4.3 2023-08-29 [2] CRAN (R 4.4.0)
#> lattice 0.22-6 2024-03-20 [3] CRAN (R 4.4.0)
#> lazyeval 0.2.2 2019-03-15 [2] CRAN (R 4.4.0)
#> lifecycle 1.0.4 2023-11-07 [2] CRAN (R 4.4.0)
#> limma 3.60.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> locfit 1.5-9.9 2024-03-01 [2] CRAN (R 4.4.0)
#> magrittr 2.0.3 2022-03-30 [2] CRAN (R 4.4.0)
#> markdown 1.12 2023-12-06 [2] CRAN (R 4.4.0)
#> MASS 7.3-60.2 2024-04-16 [3] local
#> Matrix 1.7-0 2024-03-22 [3] CRAN (R 4.4.0)
#> MatrixGenerics 1.16.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> matrixStats 1.3.0 2024-04-11 [2] CRAN (R 4.4.0)
#> memoise 2.0.1 2021-11-26 [2] CRAN (R 4.4.0)
#> mgcv 1.9-1 2023-12-21 [3] CRAN (R 4.4.0)
#> minet 3.62.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> munsell 0.5.1 2024-04-01 [2] CRAN (R 4.4.0)
#> NetRep 1.2.7 2023-08-19 [2] CRAN (R 4.4.0)
#> network 1.18.2 2023-12-05 [2] CRAN (R 4.4.0)
#> nlme 3.1-164 2023-11-27 [3] CRAN (R 4.4.0)
#> nnet 7.3-19 2023-05-03 [3] CRAN (R 4.4.0)
#> OrganismDbi 1.46.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> patchwork 1.2.0 2024-01-08 [2] CRAN (R 4.4.0)
#> pillar 1.9.0 2023-03-22 [2] CRAN (R 4.4.0)
#> pkgconfig 2.0.3 2019-09-22 [2] CRAN (R 4.4.0)
#> plyr 1.8.9 2023-10-02 [2] CRAN (R 4.4.0)
#> png 0.1-8 2022-11-29 [2] CRAN (R 4.4.0)
#> preprocessCore 1.66.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> prettyunits 1.2.0 2023-09-24 [2] CRAN (R 4.4.0)
#> progress 1.2.3 2023-12-06 [2] CRAN (R 4.4.0)
#> ProtGenerics 1.36.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> purrr 1.0.2 2023-08-10 [2] CRAN (R 4.4.0)
#> R6 2.5.1 2021-08-19 [2] CRAN (R 4.4.0)
#> rappdirs 0.3.3 2021-01-31 [2] CRAN (R 4.4.0)
#> RBGL 1.80.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> RColorBrewer 1.1-3 2022-04-03 [2] CRAN (R 4.4.0)
#> Rcpp 1.0.12 2024-01-09 [2] CRAN (R 4.4.0)
#> RCurl 1.98-1.14 2024-01-09 [2] CRAN (R 4.4.0)
#> reshape2 1.4.4 2020-04-09 [2] CRAN (R 4.4.0)
#> restfulr 0.0.15 2022-06-16 [2] CRAN (R 4.4.0)
#> RhpcBLASctl 0.23-42 2023-02-11 [2] CRAN (R 4.4.0)
#> rjson 0.2.21 2022-01-09 [2] CRAN (R 4.4.0)
#> rlang 1.1.3 2024-01-10 [2] CRAN (R 4.4.0)
#> rmarkdown 2.26 2024-03-05 [2] CRAN (R 4.4.0)
#> rpart 4.1.23 2023-12-05 [3] CRAN (R 4.4.0)
#> Rsamtools 2.20.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> RSQLite 2.3.6 2024-03-31 [2] CRAN (R 4.4.0)
#> rstudioapi 0.16.0 2024-03-24 [2] CRAN (R 4.4.0)
#> rtracklayer 1.64.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> S4Arrays 1.4.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> S4Vectors 0.42.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> sass 0.4.9 2024-03-15 [2] CRAN (R 4.4.0)
#> scales 1.3.0 2023-11-28 [2] CRAN (R 4.4.0)
#> sessioninfo 1.2.2 2021-12-06 [2] CRAN (R 4.4.0)
#> shape 1.4.6.1 2024-02-23 [2] CRAN (R 4.4.0)
#> SparseArray 1.4.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> statmod 1.5.0 2023-01-06 [2] CRAN (R 4.4.0)
#> statnet.common 4.9.0 2023-05-24 [2] CRAN (R 4.4.0)
#> stringi 1.8.3 2023-12-11 [2] CRAN (R 4.4.0)
#> stringr 1.5.1 2023-11-14 [2] CRAN (R 4.4.0)
#> SummarizedExperiment 1.34.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> survival 3.6-4 2024-04-24 [3] CRAN (R 4.4.0)
#> sva 3.52.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> tibble 3.2.1 2023-03-20 [2] CRAN (R 4.4.0)
#> tidyr 1.3.1 2024-01-24 [2] CRAN (R 4.4.0)
#> tidyselect 1.2.1 2024-03-11 [2] CRAN (R 4.4.0)
#> txdbmaker 1.0.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> UCSC.utils 1.0.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> utf8 1.2.4 2023-10-22 [2] CRAN (R 4.4.0)
#> VariantAnnotation 1.50.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> vctrs 0.6.5 2023-12-01 [2] CRAN (R 4.4.0)
#> WGCNA 1.72-5 2023-12-07 [2] CRAN (R 4.4.0)
#> withr 3.0.0 2024-01-16 [2] CRAN (R 4.4.0)
#> xfun 0.43 2024-03-25 [2] CRAN (R 4.4.0)
#> XML 3.99-0.16.1 2024-01-22 [2] CRAN (R 4.4.0)
#> xml2 1.3.6 2023-12-04 [2] CRAN (R 4.4.0)
#> xtable 1.8-4 2019-04-21 [2] CRAN (R 4.4.0)
#> XVector 0.44.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#> yaml 2.3.8 2023-12-11 [2] CRAN (R 4.4.0)
#> zlibbioc 1.50.0 2024-04-30 [2] Bioconductor 3.19 (R 4.4.0)
#>
#> [1] /tmp/Rtmp333xCH/Rinst2898096945e00d
#> [2] /home/biocbuild/bbs-3.19-bioc/R/site-library
#> [3] /home/biocbuild/bbs-3.19-bioc/R/library
#>
#> ──────────────────────────────────────────────────────────────────────────────References
Almeida-Silva, Fabricio, and Thiago Venancio. 2021. BioNERO: Biological Network Reconstruction Omnibus. https://github.com/almeidasilvaf/BioNERO.
Jin, J, F Tian, D C Yang, Y Q Meng, L Kong, J Luo, and G Gao. 2017. “PlantTFDB 4.0: toward a central hub for transcription factors and regulatory interactions in plants.” Nucleic Acids Res 45 (D1): D1040–D1045. https://doi.org/10.1093/nar/gkw982.
Kim, Myung Shin, Seungill Kim, Jongbum Jeon, Ki Tae Kim, Hyun Ah Lee, Hye Young Lee, Jieun Park, et al. 2018. “Global gene expression profiling for fruit organs and pathogen infections in the pepper, <i>Capsicum annuum</i> L.” Scientific Data 5: 1–6. https://doi.org/10.1038/sdata.2018.103.
Lawrence, Michael, Robert Gentleman, and Vincent Carey. 2009. “Rtracklayer: An R Package for Interfacing with Genome Browsers.” Bioinformatics 25: 1841–2. https://doi.org/10.1093/bioinformatics/btp328.
Proost, Sebastian, Michiel Van Bel, Dries Vaneechoutte, Yves Van de Peer, Dirk Inzé, Bernd Mueller-Roeber, and Klaas Vandepoele. 2015. “PLAZA 3.0: an access point for plant comparative genomics.” Nucleic Acids Research 43 (D1): D974–D981. https://doi.org/10.1093/nar/gku986.
Siddique, Muhammad Irfan, Hea Young Lee, Na Young Ro, Koeun Han, Jelli Venkatesh, Abate Mekonnen Solomon, Abhinandan Surgonda Patil, Amornrat Changkwian, Jin Kyung Kwon, and Byoung Cheorl Kang. 2019. “Identifying candidate genes for Phytophthora capsici resistance in pepper (Capsicum annuum) via genotyping-by-sequencing-based QTL mapping and genome-wide association study.” Scientific Reports 9 (1): 1–15. https://doi.org/10.1038/s41598-019-46342-1.